1 of 8
Marka | Sole Diesel (ES) |
Model | MINI 29 |
Rok | 2023 |
Moc całkowita | 26.82 KM |
Lokalizacja | Szczecin, Polska |
Rodzaj paliwa | Diesel |
Stan | nowe |
Liczba cylindrów | 3 |
MINI-29 v6 Engine TMC-40P 2.00:1 Gearbox.
The MINI-29 is 3 cylinders, mechanical injection diesel engine for boats ultra-compact which performs 27 hp at 3.600 rpm and 952 cc, easy maintenance. The base engine is manufactured by Mitsubishi which guarantees a very reliable engine. As all the Solé Diesel's engines the MINI-29 is manufactured with a water cooler made of one piece cast without any welding to minimise the risk of leakage, and its oversized raw water pump ensures the water flow required for engine cooling. It is an engine mainly designed for sailboats and small fishing boats, with special feets available for repowering, this kit adapts the size of the new engine with the old one, that minimize the installation cost. Moreover, it has available customizations such as filters relocation, raw water pump on the front side, dry exhaust... It meets with the RCD II and BSO II.
Der MINI-29 ist ein ultrakompakter 3-Zylinder-Dieselmotor mit mechanischer Einspritzung für Boote, der 27 PS bei 3.600 U / min und 952 ccm leistet und wartungsfreundlich ist. Der Basismotor wird von Mitsubishi hergestellt, was einen sehr zuverlässigen Motor garantiert. Wie alle Solé-Diesel-Motoren wird der MINI-29 mit einem Wasserkühler aus einem Gussstück ohne jegliche Schweißnähte hergestellt, um das Leckagerisiko zu minimieren, und seine überdimensionierte Seewasserpumpe stellt den für die Motorkühlung erforderlichen Wasserfluss sicher. Es ist ein Motor, der hauptsächlich für Segelboote und kleine Fischerboote entwickelt wurde, mit speziellen Füßen, die zum Repowering erhältlich sind. Dieses Kit passt die Größe des neuen Motors an den alten an, wodurch die Installationskosten minimiert werden. Darüber hinaus verfügt es über verfügbare Anpassungen wie Filterverlagerung, Seewasserpumpe an der Vorderseite, Trockenauslass ... Es trifft auf RCD II und BSO II.
MINI-29 to 3-cylindrowy silnik wysokoprężny z wtryskiem mechanicznym do łodzi, ultrakompaktowy, osiągający moc 27 KM przy 3600 obr./min i 952 cm3, łatwy w utrzymaniu. Podstawa silnika jest produkowana przez firmę Mitsubishi, co gwarantuje bardzo niezawodną pracę silnika. Jak wszystkie silniki Solé Diesel, MINI-29 jest produkowany z chłodnicą wody wykonaną z jednego kawałka odlewu bez spawania, aby zminimalizować ryzyko wycieku, a jego pompa wody morskiej zapewnia chłodzenie silnika. Jest to silnik przeznaczony głównie do łodzi żaglowych i małych łodzi rybackich. Ponadto posiada dostępne dostosowania, takie jak relokacja filtrów, pompa wody morskiej z przodu, suchy wydech... Spełnia wymagania RCD II i BSO II.
Base engine manufacturer: Mitsubishi
Type: Diesel, 4 stroke
Number of cylinders: 3, in line
Intake system: Naturally aspirated
Bore x Stroke :76 mm x 70 mm (2,99 in x 2,76 in)
Total displacement 952cc
Compression ratio 22:1
Intermittent power 27 HP (m) (20 kW)
Continuous power 24,5 HP (m) (18 kW)
RPM 3600
Injection system: Mechanical and indirect
Starter motor 12 V (1,2 kW)
Alternator 75 A (12 V)
Maximum operating angle 25º
Rotation (viewed from flywheel side) Counterclockwise
Cooling system: Sea water heat exchanger and coolant closed circuit
Dry weight without gearbox 118 Kg (260,1 lb)
Sea water hose diameter 20 mm (0,79 in)
Fuel feeding hose diameter 8 mm (0,31 in)
Fuel return hose diameter 5 mm (0,2 in)
Exhaust hose diameter 50 mm (1,97 in)
Hersteller moror base: Mitsubishi
Typ: Diesel, 4 takt-Schiffsdieselmotor
Anzahl der Zylinder: 3, takt-schiffssdieselmotor
Lufteinlass-System: Selbstsaugender Motor
Bohrung x Hub: 76 mm x 70 mm (2,99 in x 2,76 in)
Hubraum 952 cc
Verdichtung 22:1
Leistung (ISO3046/1) 27 HP (m) (20 kW)
Dauerleistung PS 24,5 HP (m) (18 kW)
Umdrehungen/Minute 3600
Einspritz-System Mechanisch und indirekt
Anlasser 12 V (1,2 kW)
Einzelheiten der Lichtmaschine 75 A (12 V)
Maximaler Betriebswinkel 25º
Dreh-Richtung (Kurbelwelle): Gegen den Uhrzeigersinn
Kühlsystem: Seewassergekühlter Wärmetauscher
Trockenes Gewicht (bobtail) 118 Kg (260,1 lb)
Wasserschlauch (Innendiameter) 20 mm (0,79 in)
Treibstoff-Einlaß-Schlauch (Innendiameter) 8 mm (0,31 in)
Treibstoff-Rücklauf-Schlauch (Innendiameter) 5 mm (0,2 in)
Auspuff-Schlauch (Innendiameter) 50 mm (1,97 in)
Przełożenie | 2.00:1 |
Ciężar | 129kg |